After using fired bricks for a long time,some dirt may appear.At this time,we need to clean them.Below,we will briefly introduce the cleaning methods for fired bricks.Please remember the following methods,so that unnecessary troubles will not occur in the future.
1.Generally,during daily cleaning and maintenance,dry cleaning is the main method.First,use a broom or dust removal paper mop to clean the fine sand and lime dust on the surface of the tiles,as well as the dirt adhering to the tile surface.Then,use a clean cloth or mop dipped in water to wipe and dry the tile surface.It should be noted that when using a mop,the water should be wrung out.
2.If black scratches,oil stains,rust spots,etc.caused by iron are difficult to remove from the surface of fired bricks,they can be wiped with cleaning powder,stain remover,car wax,etc.,and then wiped back and forth with a clean coarse cotton cloth until dry.
3.If the floor tiles are already dirty and scratched at the time of purchase,and there is some wear and tear on the brightness,you can find a professional polishing tile cleaning and maintenance manufacturer to handle it.
4.After polishing during the production process,fired bricks will leave some fine concave and convex pores,known as capillary pores.If contaminated with colored substances such as tea,coffee,soy sauce,ink,etc.,the dirt is easy to penetrate into the interior of the brick,and it needs to be dealt with immediately.So manufacturers will add an extra layer of protective agent before leaving the factory.If there is residual protective agent on the surface of polished tiles,talcum powder can be sprinkled on the tile surface,and then wiped back and forth with a dry coarse cotton cloth to remove it.After construction,high pH or corrosive cleaning solvents should generally not be used for cleaning,as their chemical properties will damage the protective layer of the tile surface and reduce the anti fouling performance.
If you accidentally get stains on the fired brick,it must be dealt with in a timely manner,so that it can be cleaned up and look as beautiful as before.Not only that,but it can also extend the service life of the fired brick.